Chandawalla Auto Industries
Chandawalla Auto Industries

Home »


Automotive Spare Parts

 


Specifications:
  • Standard: DIN 71412, SAE J-534, DIN 3404, DIN 3405, IS 4009-1, IS 4009-2 or as per customer spec
  • Material: M.S., EN 1AL (free cutting steel), 11SMnPb30+C, SAE 12L13, S.S. 303, S.S. 316
  • Hardness: Minimum 500 HV for nipple head
  • Thread: parallel, taper
  • Surface treatment: clear (blue) zinc plated, yellow zinc plated, olive green zinc plated, zinc trivalent plated



Specifications:


  • Thread size: M8 to M20,  5/16” to 3/4"

  • Length under the head: 35MM to 550MM,  1.1/2" to 22”

  • Thread: I.S.O. metric (fine & rough), UNF / UNC

  • Material: low carbon steel, AISI 1010, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541

  • I.S.O. material strength grade:  4.6, 5.8, 6. 8, 8. 8 

  • SAE material strength grade:  2, 5 

  • Surface treatment: autoblack & oiled, phosphated & oiled, clear (blue) zinc electroplated, yellow zinc electroplated

  • Head forms: fillister head, milled head, step head, dome head




 



Specifications:
  • Standard: DIN 71802, Axial type (180 deg.), Linkage type
  • Material: EN 1AL(free cutting steel), 11SMnPb30+C, 12SL13, EN 8, AISI 1045, S.S. 304, S.S. 316
  • Threading: Right hand (R.H.), Left hand (L.H.)
  • Surface treatment: clear / yellow zinc plated, olive green zinc plated



Specifications:


  • Thread size: M10 to M30, 3/8 to 1"

  • Gap between the legs: 50MM to 170MM, 2" to 7"

  • Length along the side: 125MM to 650MM, 5" to 26"

  • Thread: I.S.O. metric (fine & rough), UNF / UNC,  BSF / BSW

  • Material: low carbon steel, AISI 1010, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2

  • I.S.O. material strength grade:  4.6, 5.8, 6. 8, 8. 8, 10.9, 12.9 

  • SAE material strength grade:  2, 5, 8 

  • Surface treatment: black paint, red paint, blue paint, clear (blue) zinc electroplated, yellow zinc electroplated, phosphated

  • Forms: round, half round, square(flat), round forged, semi round forged, square forged



Specifications:


  • Standard: DIN 7643 or as per customer specification

  • Material: Mild Steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8 / AISI1045

  • Thread: I.S.O. metric (fine & rough)

  • Surface treatment: clear /yellow zinc plated, olive green zinc plated, dacromet

  • Type: 2 holes, 3 holes, 4 holes

  • Common sizes:M10x1.25X19, M12x1.25X24, M14x1.5X26, M16x1.5X28, M18x1.5X32



Specifications:


  • Standard: DIN 7642 or as per customer specification

  • Material: Mild Steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, S.S. 202, S.S. 304

  • Surface treatment: clear /yellow zinc plated, dacromet, geomet

  • Type: plain(welding), groove (step), double side

  • Common sizes: M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2"



Specifications:
  • Thread size: M12 to M26,  7/16” to 1"
  • Length under the head: 25MM to 150MM,  1" to 6”
  • Thread: I.S.O. metric (fine & rough), UNF / UNC
  • Material: EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2
  • I.S.O. material strength grade:  6. 8, 8. 8, 10.9, 12.9 
  • SAE material strength grade:  5, 8 
  • Surface treatment: phosphated, clear zinc electroplated, yellow zinc electroplated, dacromet, geomet




Specifications:


  • Standard: DIN 931/ISO 4014, DIN 933/ISO 4017, DIN 960/ISO 8765, DIN 961/ISO 8676, ANSI B18.2.3.1M, BS 1768, DIN 6914/ISO 7412/ANSI B18.2.3.7M, DIN 6921

  • Thread size: M8 to M52,  5/16” to 2"

  • Length under the head: 15MM to 500MM,  9/16" to 20”

  • Thread: I.S.O. metric (fine & rough), UNF / UNC, BSF / BSW

  • Material: low carbon steel, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2, SAE 10B21, SAE 15B25, SAE 15B41, S.S.304, S.S.316

  • I.S.O. material strength grade:  4.6, 5.8, 6. 8, 8. 8, 10.9, 12.9 

  • SAE material strength grade:  2, 5, 8 

  • Surface treatment: autoblack, phosphated, clear (blue) zinc electroplated, yellow zinc electroplated, hot dip galvanized, dacromet, geomet





Specifications:


  • Standard: DIN 603, DIN 608 or as per customer specification

  • Thread size: M8 to M20,  5/16” to 3/4"

  • Length under the head: 25MM to 400MM,  1" to 16”

  • Thread: I.S.O. metric (fine & rough), UNF / UNC, BSF / BSW

  • Material: low carbon steel, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4

  • I.S.O. material strength grade:  4.6, 6. 8, 8. 8, 10.9

  • Surface treatment: auto black, clear zinc electroplated, yellow zinc electroplated, hot dip galvanized, dacromet, teflon coated



Specifications:
  • Diameter: 16MM to 42MM
  • Length: 100MM to 200MM
  • Material: EN 8D/AISI 1045, EN 19/AISI 4140 /42Cr4Mo2, SAE 8620
  • Hardness:  58 to 62 HRC
  • Surface treatment: black, ground & oiled



Specifications:
  • Sizes: Application defined or as per customer spec.
  • Material: Mild Steel, EN 8/AISI 1035, EN 8D/AISI 1045, 
  • Surface treatment: black oxide, powder coated, zinc electroplated

 




Specifications:


  • Standard: DIN 74361 form H or as per customer specification

  • Material: EN 8D/AISI 1045, EN 19/42Cr4Mo2

  • ISO property class: 8, 10

  • Thread: I.S.O. metric (fine & rough), UNF / UNC

  • Surface treatment: Phosphated, Autoblack, Dacromet, Geomet

  • Common sizes: M18x1.5, M20x1.5, M22x1.5, M





Specifications:


  • Standard: DIN 980V, DIN 6925, ISO 7042, DIN 985 or as per customer spec.

  • Material: Mild Steel,  EN 8/AISI 1035, EN 8D/AISI 1045

  • ISO property class: 5, 8, 10

  • Thread: I.S.O. metric (fine & rough), UNF / UNC, BSF / BSW

  • Surface treatment: autoblack, clear / yellow zinc electroplated, dacromet



Specifications:


  • Standard: DIN 935, DIN 937, DIN 979

  • Material: Mild Steel,  EN 8/AISI 1035, EN 8D/AISI 1045

  • ISO property class: 5, 8, 10

  • Thread: I.S.O. Metric (fine & rough), UNF / UNC, BSF / BSW

  • Surface treatment: Autoblack, Clear / Yellow Zinc Electroplated, Dacromet, Geomet, Black Oxide, Hot Dip Galvanized





Specifications:


  • Standard: DIN 6331, DIN 6923

  • Material: Mild Steel, EN 8/AISI 1035. EN 8D/AISI 1045

  • ISO property class: 5, 8

  • Thread: I.S.O. metric (fine & rough), UNF / UNC

  • Surface treatment: phosphated, autoblack, black oxide, clear / yellow zinc electroplated






Specifications:

  • Standard: DIN 125A/ISO 7089, DIN 125B/ISO 7090, DIN 126/ISO 7091, DIN 433/ISO 7092, DIN 9021/ISO 7093, DIN 440R/ISO 7094, DIN 127, DIN 6319, DIN 6340, DIN 6916, DIN 7349, DIN 7989, DIN 6797, DIN 2093
  • Material: Mild Steel, AISI 1045, C45, EN 1AL, Spring Steel, EN 42J, S.S. 304, S.S. 316
  • Surface treatment: clear zinc electroplated, yellow zinc electroplated, autoblack, dacromet, geomet, black oxide, hot dip galvanized, zinc trivalent plated



Specifications:


  • Type: Slotted spring pin, Spiral spring pin

  • Standard: ISO 13337, ISO 8752, ISO 8750, ISO 8748, ISO 8751

  • Material: Hardened spring steel

  • Surface Treatment: Thermally blackened, zinc passvisation







Chandawalla Auto Industries
Pranav Chandawalla (Marketing Director)
No. 188, Khetwadi Back Road, Mansukh Niwas
Mumbai - 400004, Maharashtra, India


Home  |   About Us   |  Products   |   Site Map  |   Contact Us   |   Mobile Site

© Chandawalla Auto Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited